Xilica Sonia AMP

Description

• Power-over-Ethernet

  PoE+ to IEEE 802.3at, Class 4

• Power Consumption

  30W maximum

• Power Output

  Four (4) channel, 15W/channel maximum (without Mic port in use);
  Four (4) channel, 6W/channel maximum (with Mic port in use)

• Microphone Port Power

  PoE to IEEE 802.3af, Class 0;
  15W maximum, 10W typical

• Operating Temperature

  32-104⁰F (0-40⁰C)

• Cooling

  Convection cooling, no fan

• Humidity

  0-95% relative humidity, non-condensing

• Connectivity

  LAN: (1) RJ45, PoE+ powered;
  Microphone: (1) RJ45, PoE power for microphone array, pass-through network to LAN port;
  Speaker(s): (4) RJ45, amplified audio out to Sonia C5

• Audio Networking

  Dante™ with AES67-compliance, four (4) output channels

• Amplifier Type

  Class D

• Amplifier Power

  Single channel: 15W;
  Dual channel: 7W;
  Four channel: 3W

• Frequency Response (20Hz-20kHz)

  +/- 1dB

• Sample Rate

  48kHz

• Dynamic Range (20Hz-20kHz BW)

  >90dB

• THD+N (20Hz to 22kHz)

  <0.3%

• Intermodulation Distortion (SMPTE)

  <0.3%

• Crosstalk (Channel-to-Channel at 1kHz)

  <-90dB

• Controls, Service & Indicators

  Reset: Momentary tactile button;
  Status: RGB LED indicator;
  LAN (PoE+)/Mic (PoE) RJ45 indicators: Green (left) – Link Status, On = Link Established; Off = No Link; Green (right) – Blink on data activity;
  Sonia C5 RJ45 indicators: One (1) Sonia C5 connected to RJ45 (8 Ohm load detected) – Left green light (on), right green light (on); Two (2) Sonia C5s connected to RJ45 (4 Ohm load detected) – Left green light (on), right green light (off)